Four Tools Needed for Jewellery Repairs

One characteristic that makes jewellery so beautiful is its delicate appearance. Unfortunately, this also means that it can be easily broken. Luckily, some tools make it easy to take on simple jewellery repairs at home instead of paying experts to do the same job. These tools can be found at any craft or hardware store, often for less than the cost of professional repair. Some of them may even be already found in the toolbox at home.

1. Workstation

This might seem obvious, but it’s very important to have a good workstation. Since most accessories are made of tiny chain links, beads and gems, anyone attempting jewellery repairs at home should have a dedicated table or desk where the project won’t be disturbed for awhile. The area should be well-lit and spacious enough to hold all of the necessary tools and placed away from small children, pets, or strong drafts that could cause small pieces to become misplaced. A magnifying glass might be useful during this process, as well.

2. Pliers

No matter what materials are being repaired, two sets of pliers are almost always needed. One pair of pliers is used to hold the jewellery in place, while the other is used to pry open jump rings, set jewels, or attach clasps. Some different types of pliers can be used for these jobs. Round-nose pliers are useful for bending metals, while chain nose pliers are better for gripping wire. However, standard needle-nosed pliers found in nearly any tool kit will work with most projects.

3. Soldering Iron

A soldering iron is a tool that is used to melt a small piece of metal (known as solder) to form a connection between two other pieces of metal. Once the solder cools, it permanently bonds the pieces together. This is perfect for closing jump rings, repairing chains or reattaching metal beads. The pliers mentioned above will be essential when using a soldering iron, as the torch creates high heat that can easily burn the user if he or she is not careful.

4. Jeweler’s Epoxy

Sometimes a soldering iron is not an appropriate tool to use for jewellery repairs. For reattaching loose stones such as pearls or opals, many jewelers turn to jeweler’s epoxy. This is a special kind of glue that requires mixing before it can be used. Before it is applied, all of the old glue should be carefully removed so that the epoxy will bond to the jewellery. A clamp or vice should be used to help hold the stone in place until the epoxy dries.

With these simple tips and a little practice, anyone will be able to perform simple jewellery repair at home, saving a favorite piece without the hefty price tag that comes along with a trip to the shop. Of course, for difficult jobs or very expensive pieces, it may still be best to consult a professional.

What Tools Are Needed for Plumbing Repairs?

Plumbing repairs require specific tools for specific repair jobs. Some problems can be fixed by a homeowner but here are problems that must be repaired by a professional plumber. It is important that certain tools are used for specific plumbing problems to prevent further damage.

Below is a list of the tools needed for plumbing repairs:

Plunger: A plunger is a common plumbing tool that is used to remove clogged toilets and sinks. Toilets and sink plungers are different as the toilet plunger has a longer handle. For the toilet, the plunger is a one that has a thick rubber bell head and a hole in the middle which covers the toilet drain. You can buy these plungers at plumbing supply stores and hardware stores. Sink plungers are good for both clogged sinks and bathtubs.

Plumbers Pipe Wrench: A plumber’s wrench is a durable and heavy duty wrench. Plumbers use this wrench for clutching a pipe or pipe fitting. As well, it can be used to tighten and unscrew nuts and caps.

Toilet Auger: Most people refer to the toilet auger as a snake. It is designed to remove stubborn clogs in the sewer line. Plumbers will feed the snake into the drain until it reaches the blockage. There is a device on the end that is used to grasp the clog and pull it out of the drain.

Sink Auger: This snake is used specifically for sink drains such as kitchen and shower drains. Like the toilet auger, it is used to locate and remove the clog from the drain. It consists of a flexible cable with an auger device attached on one end. It is fed into the drain and is used to grasp and pull at the clog to remove the clog.

Plumbers Tape: This Teflon tape is used to make joint connections more tight and secure. This tape is wound around the thread of the pipes to fill in the gaps between the threads. It is used to prevent leaks. It effectively seals pipe threads in the pipe connections. As well, it prevents air and gas leakage from threaded connections.

Pliers: There are various types of pliers used a variety of different plumbing tasks. They are used for such tasks as removing and tightening various types of fittings and nuts as well as holding pipes when soldering.

Pipe and Wire Locator: This electronic device is used to trace the path and determine the depth of wires and metallic pipes without having to deactivate the system.

Electric Pipe Soldering Tool: Plumbers use this tool to solder fittings and pipe joints. The plumber clamps the soldering tool’s heads over a joint between pipes or fittings. A set of plates transfer electrically generated heat to the pipe or metal. Once the fitting or pipe reaches the appropriate temperature, the plumber will then apply the solder.

These are just a few of the tools required for plumbing repairs. Plumbers have all of the tools and experience to make the proper repairs.