5 Common DIY Windshield Repair Mistakes

You need to understand the importance of your windshield. Cracked windshields may cause serious safety risks, such as reduced visibility and lower structural integrity. If you want to prevent further damage to your windshield, we suggest that you get it repaired as soon as possible. While fixing the crack, make sure you avoid the following common mistakes. Read on to know more.

Using DIY kits with Zero Experience

DIY kits do work but only when you know how to use them properly. If you think you can use these kits easily, you need to think again. It may be harder than you may think. So, if you have zero experience with this type of job, we suggest that you don’t follow the DIY route.

If done improperly, the repair job may end up damaging the windshield further. As a result, you may have to replace the unit, which will cost you a good deal of money.

Ignoring the Air Bubbles

Most DIY kits come with a special resin to seal the cracked area. Basically, the idea is to ensure that dirt, air, and moisture won’t get into the windshield. When using the resin, make sure you pay attention to the air bubbles in the resin. They may have a negative impact on the entire repair process.

What you need to do is get rid of these bubbles. Professionals make use of special tools in order to remove bubbles.

Using Unaligned Tools

Typically, DIY repair kits feature a suction tool to fill the cracks in your windshield. However, the problem is that most users forget to align the tool due to lack of experience. If you repair the windshield without aligning the tool, you may end up with an ugly looking windshield.

Ignoring the Insurance Policy

Usually, insurance providers cover the replacement or repair of these shields. But the claim is considered invalid when owners try to do the repair themselves. If you end up making the mistakes given above, the insurance won’t cover the repair costs and you will have to pay all the money out of your own pocket.

Waiting too Long

If you wait too long to get your windshield repaired, you will run the risk of damaging it further. Actually, people who follow the DIY route take a lot of time to make the choice. What you should do is address the problem as soon as you detect it. There is no point in waiting for weeks.

Ideally, if you want to prevent the cracks from spreading, we suggest that you fill in the cracks as soon as you can. Actually, the smallest cracks can grow into bigger ones if not treated in a timely fashion.

Long story short, if you have a cracked windshield and have no idea how to fix it, we suggest that you get in touch with an expert. You can also do the repairs yourself provided you know how to do it. After all, you don’t want to end up making some costly mistakes. Hope this helps.

Quality Matters in Medical Equipment Repairs

People will often spend quite a bit of time searching for a quality family doctor that meets their needs. Few people just look up  the word “doctor” in the phone book and then go to the nearest one available. However, in the field of medical equipment repair, many hospitals are using this “flip a coin” approach to selecting who will service their clinical equipment.

Finding a company that provides quality hospital equipment repair services is not impossible, but some forethought should be put into the selection process. As someone who has worked both as an in-house Biomedical Equipment Technician (BMET) and as repair technician for a medical device repair vendor, I have learned a great deal about the need for quality when it comes to servicing these devices. When it comes to outsourcing a repair that may be beyond the capabilities of the in-house Biomedical Engineering department, it is important that the repair facility uphold the same or higher quality standards than the Hospital sending in the faulty equipment. For this reason, I only recommend using repair facilities that are ISO certified.

The ISO 9000 series of standards is a family of standards for Quality Management Systems. Many hospitals are seeking ISO certification and it makes sense for companies that work closely with hospitals to do the same. A medical equipment repair company willing to go through the process of ISO certification shows a commitment to quality service and performance improvement. If your organization is searching for quality medical repair services, then ISO certification should be a determining factor in the search.

7 Tips of Cleaning Up After Repairs or Construction Work

When it comes to major home repairs and renovations, you can expect a big mess upon completion of the work. Even if you cover the floors and furniture with plastic or paper, you can bet that white dust will find its way underneath. Whether you have done a partial refurbishment of a single room, you have touched up the whole place, it is important to know how to tackle cleaning afterwards. Few tips can greatly help you in that regard:

Know where to start from – before you do anything else, you need to open up the windows to ventilate the place. There might be a lingering smell of glue, wood, plaster or any other building material. Next, it is time to remove the larger objects like tiles, cement bags and other leftover materials. As you begin to clean, always start from the top and move towards the bottom. Since the walls have likely accumulated some dust, you can wipe them with a damp cloth.

Cleaning in the bathroom – if you have replaced the sink in the bathroom or done some other renovation work there, you must first clean the sanitary ware and remove the debris left after renovation. Always start with the largest item in the room and finish with the smallest one. It is best to clean in phases. First, use a dry microfibre cloth and then a wet one. That way you can deal with the dust on the tiles effectively.

Cleaning windows – if you notice some glue or silicone residue on the windows, you need to remove it with a scraper. Be very gentle not to scratch the material. If there are paint drops around the edge of the window frame, you can use a cotton pad with nail polish remover to clear it. Next on your list is to wipe the area from dust. Use a wet cloth and lukewarm for this task.

Cleaning spots – if you find a spot in the area that is tough to clean, you will need something a little more potent than just water. According to experts, ammonia works well for individual spots. Dilute it with water and apply it with a cloth and scrub.

Fight unpleasant odour – in many cases smell from paint or some other building material is left to linger in the area. Since that is rather unpleasant, you can employ baking soda to help you out. Fill a bowl with baking soda and place in the room overnight. It will absorb the unpleasant odour and refresh the place.

Cleaning the floor – one of the final tasks you need to address is cleaning the floor. It is recommended that you leave this task for last since that is where the dust will settle. Before you go on and use detergent on the area, go over with a damp cloth to tackle the dirt and dust. Once you are done, it is time to use a specialised product to address the type of surface, i.e. hardwood, tile or anything else really. Once you are done, clean the skirting boards. If you have no other solution, use a litre of water and 2-3 tbsp. lemon juice for the task.

Consider getting help – after-builders cleaning services are quite common and are an excellent way to tackle the task. Instead of you bothering with the cleaning process, you can let professionals handle every single aspect of it. They will come with the gear and solutions they need to deal with the job to the highest standard.

Now that you know how to tackle after builders cleaning, you can rest easy and enjoy your home after renovations quicker.